Rochester Gauges 8600 Series Spiral Gauge

Rochester Gauges 8600 Series Spiral Gauge

Regular price $166.00 Sale

Rochester Gauges 8600 Series Spiral Gauge

1-1/2” MNPT TOP MOUNT SPIRAL GAUGE FOR HYDRAULIC, LUBRICATING, FUEL-OIL, GASOLINE AND DIESEL TANKS

Application
8600 series spiral gauges are intended for stationary or mobile fuel tank applications containing middle distillates such as diesel and unless equipped with optional stainless steel support rods are not intended for use in fuels containing more than 10% ethanol or more than 30% bio-diesel. These gauges are not intended for use in pressure vessels. Models with optional stainless steel supports may also be used for fuels containing ethanol, bio-diesel and interstitial applications. The 8600 Series is not recommended for off-road equipment.

General Information
The 8660 spiral gauge is supplied with an easy to read, side-view fractional dial. The model 8680 spiral gauge is equipped with a standard top reading fractional dial.

All 8600 Series spiral gauges have a 1 1⁄2″ MNPT tank connection and are suitable for tank pressures up to 25 psig maximum. They are designed for top mounting in tanks up to 30″ deep are UL listed for flammable liquids.

Rochester gauge dials are magnetically driven. Fuel vapor cannot reach inside of the gauge lens and attack the UV rated lens material. Rochester gauges may be easily converted for remote output by simply installing the R3D Remote Ready dial and plugin Hall Effect sender module.

Includes

  • Direct Read Dial
  • Option to add TwinSite Dial in 240-30, 0-90 or 0-30 Ohms output

General Specifications*

Mounting
Designed for top-mounting only.

Accuracy
Accuracy depends upon proper gauge sizing. Direct read dials +/-8%, TwinSite dials +/-12%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. Device does not prevent overfill. All accuracy estimates are expressed as a percent of full scale.

Temperature
Standard operating range is -40°F to 158°F, -40°C to 70°C.
Humidity
Exposed portions should be painted for marine applications, less dial.

Shock
Shorter styles are suitable for some mobile, off-road applications.

Vibration
Shorter styles are suitable for some mobile, off-road applications.
Power
0.5 watts maximum for TwinSite® versions.

Tank Pressure
0 to 25 PSIG [0 – 1,7 Bar] maximum.
Approval
Direct indicating gauge. Available UL listed for flammable liquids. Some models UL recognized for marine service.

Materials of Construction*

Head
Die-cast zinc.

Guide Rod
Zinc-plated steel.

Centershaft
Brass.

Tie Plate, Guide, & Bearing Pin
Stainless steel.

Center Shaft Holder & Magnet Bushing
Acetal.

Float
Nitrile rubber.

Drive Magnet
Neo, nickel-plated.

Standard Dial
Polycarbonate, hermetically sealed.

Side-View Dial
Aluminum with polycarbonate crystal, hermetically sealed.

TwinSite® Sender
Polyamide.

*Materials and specifications are subject to change without notice. Pressure ratings subject to change due to temperature and other environmental considerations.

When Ordering Specify:

1. Gauge model number.
2. Tank height.
3. Ohm range on TwinSite® version.
4. Riser height, if any.
5. Any special requirements.

Contact us for additional lengths that may not be listed, our inventory is constantly changing so there’s a good chance we will have what you are looking for.