Rochester Gauges 8700 Series Adjustable Gauges, Direct Read or TwinSite Sender
Rochester Gauges 8700 Series Adjustable Gauges, Direct Read or TwinSite Sender

Rochester Gauges 8700 Series Adjustable Gauges, Direct Read or TwinSite Sender

Regular price $211.34 Sale

The 8700 Series Adjustable gauges are manufactured by Rochester Gauges in Dallas, TX, USA.  The 8700 Series junior gauges have a lightweight injection molded polyester head with standard SAE gasoline gauge flange (2-1/8" [54 mm] bolt circle for five #10 screws not furnished.) and are designed for use in non-heated water tanks with 0-10 PSIG [0-0.68 Bar] of low pressure.  Some common applications include trucks, boats and recreational vehicles.

The TwinSite dials allow for direct reading at the installation location as well as the ability to transmit the liquid level readings to a remote receiver or control box.  This adjustable model is designed to fit tanks with depths between 6” and 24”, although other lengths are available by special order so please call or email us if you require something unique.  Each 8700 series gauge ships with a Buna-N gasket.

These water gauges are designed for top mounting only. They are equipped with float arms which are to be cut off to the proper length for the tank into which they will be installed. Data sheet DS-337 furnishes the proper cut lengths and instructions on how to install the float and crimp it in place.

Available configurations include:

  • 240-30 Ohms
  • 0-90 Ohms
  • Direct Read Only
  • Gauge Only - No Dial

* Photo shows TwinSite configuration.  TwinSite Dial not included with direct read or gauge only products.